Look at the very left side of the ribbon and you’ll see a couple of options for extrusion. We want to make sure that the sketch has extruded as a solid. If you rotate your view around in the workspace, you should now see a solid rectangle. Choose the Extrude option from the ribbon. ⇒ FIVE: Now that we have the rectangle sketched, we need to extrude it to make it solid. Once you’ve made the sketch you want, click the “OK” button near the right side of the ribbon. Left click again to create the rectangle. Left click inside of the sketch plane and move your mouse to the area that you want to make the rectangle end at. ![]() Click on the Rectangle Tool under the Sketching Panel of the ribbon. For this article, I’m just going to make a basic rectangle. ⇒ FOUR: Once you’re in the Sketching mode, you need to make some kind of basic sketch. Once you’ve confirmed all the information is correct, click “Sketch”. You will see the name of the plane fill in the information boxes on the Sketch context window near the right side of your screen. Hover over any of the planes that are already in the workspace and left click on it. You will need to choose a plane to sketch on. ⇒ THREE: Now we need to sketch something out and create a solid out of the sketch. ⇒ TWO: Once you’re inside Creo Parametric, you need to click “New” on the ribbon at the top-left of the program. It’s important to note that Creo Direct, Creo Simulate, and Creo Layout do not offer the STL export option. ⇒ ONE: First of all, you have to open up PTC Creo Parametric. Exporting an STL file in PTC Creo Instructions ![]() Considering the wide adoption of STL as the common 3D Printing format, it’s important to know how to actually create an STL file in the software that you are using. The DaVinci AIO, Makerbot Replicator, and the Cube X, are just a few of the 3D Printers that can print STL files. Just about every 3D Printer on the market has the ability to print STL files. This format has become the go-to file format for 3D Printable files. I’ve recently been learning my way around the product and thought I would share the workflow for exporting an STL file from PTC Creo Parametric.įirst off, an STL file is known as a stereolithography file. It is used for a wide number of applications across many different industries. PTC Creo is an industry-standard 3D Design software.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |